Welcome: Wuxi Dajiang Environmental Technology Co., Ltd.
info@dagyee.com +8613961861780
Home      Products     PAM Polymer Preparation unit       Chemical Automatic Liquid Polymer For St
  • Chemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing Systems
  • Chemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing Systems
  • Chemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing Systems
Chemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing SystemsChemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing SystemsChemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing Systems

Chemical Automatic Liquid Polymer For Stamp Making Flocculant Dosing Systems

PAM polymer preparation unit Description


This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user.
The preparation solution goes from the preparation tank to the curing tank and then into the storage tank. When the liquid level of the storage tank is at a high level, the preparation process will automatically stop, and when the solution drops to a low level, the batching process will automatically start.Agitator is set in both preparation tank and curing tank to ensure the dilution and curing of reagents.The prepared flow rate and concentration can be determined by adjusting the inlet flow rate and the rotating speed of the screw shaft.


Polymer dosing device
Polymer dosing device is composed of hopper, push screw, electric heater and etc. The effective volume of the hopper can meet the dosage for a long time which is equipped with sight glasses for observing material level monitored by the dry powder level meter. The push screw driven by the high-precision reducer can satisfy the dosage. The electric heater can be installed in the discharge pipe of push screw, and it can prevent the powder from caking.

Polymer dissolving device
Polymer dissolving device is composed of pre-soaking device, tank, and 3 sets of mixers. The pre-soaking device is to infiltrate and mix the polymer powder in advance. The 3 tanks are precast mixing tank, homogeneous slaking tank and solution storage tank, in which there is a mixer correspond to guarantee the homogeneity.

Water supply device
Water supply device is composed of pipeline, manual ball valve, filter, pressure gauge, solenoid valve, stop valve, and the rotor flow meter, etc.
Polymer and dilution solution dry polymers


PAM Polymer Preparation Unit Model



Poly Preparation And Dosing System

Three Tanks Automatic Polymer Preparation


PAM Polymer Preparation Feature


Automatically Operate
Amount of the powder feeding is exactitude
SUS304 crust, all imported parts
All message is output by touch
Guarantee the treatment effect, avoid waste
Attractive appearance

Intelligent Dosing Control Systems Polymer Preparation


PAM Polymer Preparation Application


Municipal Sewage
Slaughter House
Metallurgical Industry Wastewater
Spraying Sewage
Printing & Dyeing Sewage
Metal-Processing Sewage
Mining Stone Wastewater
Electronic Sewage